End-of-line Standard Ionizer
Model P-2021
The Staticmaster® P-2021 End-of-line Standard Ionizer is a simple, reliable, efficient and effective means of eliminating static in a variety of industries, including electronics, optics, graphics and finishing. Easy to install on any clean, dry compressed air or inert gas line, the P-2021 emits a powerful stream of ions to quickly neutralize electrostatic charges. By design, the P-2021 never goes out of balance, so it does not require periodic calibration. In addition, it requires no electrical power to operate, so it’s intrinsically safe for use in flammable or explosive environments.
Category
Specifications
Activity: 10 mCi (370 MBq)
Balance: ±0 V
Dimensions: 0.50in W x 2.32in L (12.7 mm x 58.9 mm)
Diameter: 0.50 in (12.7 mm)
Enclosure (MODEL P-2021-1000): 316 Stainless housing
Enclosure (MODEL P-2021-2000): 316 Stainless housing
Enclosure (MODEL P-2021-5000): 316 Stainless housing
Enclosure (MODEL P-2021-8000): 303 Stainless housing
Gas Input: <40 psi (Max 100 psi) Clean Dry Air (CDA) or Nitrogen
Line Connection: 1/8 in – 27 NPSM Thread male/female
Technology: Alpha
Weight: 1.3 oz (37 g)
DECAY RATE: 0.7 seconds (±1000 to 100V), ANSI/ESD Association STM 3.1 @30 psi, 6 inches
Compatible with:
- Cleanroom Ionizing Gun, Thumb-actuated Model P-2021-1112
- Cleanroom Ionizing Gun, Nylon Handle Model P-2021-5432
- Cleanroom Ionizing Gun, Aluminum Handle Model P-2021-5942
- Industrial Ionizing Gun, Thumb-Actuated Model P-2021-8101
- Industrial Ionizing Gun Kit, ST1 Handle Model P-2021-8201
- Neutralizer™ Refinishing Gun Model P-2021-Z705
